TE2140 4 rear sensor unit for sloping bumpers
Ph 0800 727-567
Specification:
| Power requirement | DC 10V - 25V |
| Max current consumption | 20mA |
| Operating Temperature | -30oC - 70oC |
| Storage Temperature | -40oC - 80oC |
| Operating Humidity | up to 95% |
| Detection Distance | up to170cm |
| Transmitting Frequency | 40KHz |
| Buzzer Sound Level | 80dB at 10cm |
| System Response Time | 0.12 sec |
The TE2140 sensors can be used on bumpers with a maximum 15 degree slope towards the ground.
Sensors available in black and silver.
Unit comes with optional "blanking" function to ensure rear spare tyres or tow bars etc on the vehicle are not detected.
The TE2140 sensors require 21mm holes to be drilled in the bumper.
Copyright © 2008 ThirdEye Auto
