Ph 09 522-1818
2 year warranty on parking sensors units
ThirdEye Auto parking sensors are easy to install with full instructions provided. Spare sensors and cables in stock.
Small micro sensor size - 22mm diameter mounted in 19mm hole drilled in bumper
Rear sensor control unit powered off reverse light circuit - easy to use connection clips provided
Compact control unit: 10cm x 8cm x 3cm in size
For most vehicles installation of sensors does not require removal of the bumper.
Hire 19mm Hole Cutter from ThirdEye Auto >>
Technical
Support available
- Ph 09 522-1818
Installation instructions - download PDF Files
Rear Sensors
Front Sensors
Blanking
function available
Sensor units with this function can be set up to not detect fixed objects
on the rear of the vehicle that would normally be within the detection
zone of the sensors – out to 45cm from each sensor. This is a very
useful function if detection of tow bars or rear spare tyres is a problem.
Also this function pushes the closest detection zone out from 30cm to
50cm (useful for SUVs, 4WDs with large rear tyres). The blanking function
can be set up during installation to be either on or off. The blanking
function is available on 4 sensor parking sensor models TE6240, TE 6245,
TE2040 and TE2140.
For
information on how to set up the “blanking function” option
- PDF File 180KB - >> click here
Additional Installation Tips
Copyright © 2018 ThirdEye Auto